STIHL Guide bar G 40cm/16" 1,6mm/0.063" 3/8"

Cutting mineral materials creates dust, heat and heavy wear. The STIHL Rollomatic G guide bar is built specifically for the GS 461 stone and concrete cutter, with integrated water flushing through the bar and sprocket nose to keep dust down and the cut cool. It helps your team work cleaner and with more control on demanding construction tasks.

Designed for reliability on site, this bar features a second tensioning hole to extend the tensioning range and hardened guide rails for long service life.

Where it excels

• Wet cutting of concrete and masonry with the GS 461
• Clean, low-dust work in construction and civil engineering
• Precise plunge cuts and openings in mineral materials

Why this bar stands out

• Water flushing at bar and sprocket nose for dust control
• Purpose-built for STIHL GS 461 performance
• Hardened rails for durability under load
• Second tensioning hole extends tensioning range

Handling in practice

Water feeds directly to the cutting zone, improving visibility and reducing abrasive wear on the chain and bar. The added tensioning hole gives you more adjustment as the chain beds in, helping maintain cutting accuracy through the job.

Capacity and specs

• Cutting length: 40 cm variant (also available 45 cm)
• Groove width: 1.6 mm (.063")
• Sprocket nose pitch: 9.32 mm (3/8")
• Sprocket nose teeth: 14
• Compatible chains: 36 GBE, 36 GBM

Tip from gardenmachineshop.com

For fastest cutting and longest life, pair this bar with a fresh 36 GBE or 36 GBM chain and ensure continuous water supply to both bar and sprocket nose.